Telescope configuration:
At the TCS do the following:
- Set the counterweights to the HiRAC configuration using
the values written in the note on the wall next to the TCS
monitor, and the TCS.
- Set telescope focus to the current reference focus:
- Read HiRAC reference focus value at Z=0, T=10 degs
at the note on the wall left to TCS monitor
- At TCS page 46 read the current FOCUS REF value
- Adjust telescope focus using the command "fo-po
value" until FOCUS REF value at TCS resembles the
reference value from the note.
|
