Nordic Optical Telescope Text Size: Smaller Text Normal Text Larger Text

Monitoring the array in reset-read-read mode



Show NOTCam R-R-R database

Gain for each quadrant


Plotted line correspond to mean value
X-axis tics are plotted every 10th day





Read out noise for each quadrant


Plotted line correspond to mean value
X-axis tics are plotted every 10th day





Normalized count rate for each quadrant from newest data


In 3 first points there may be significant shutter effect.
Normalization is done using 4th, 5th and 6th points.
Light level during the test may not be constant enough to give very reliable result.





Amount of dead pixels (%)


X-axis tics are plotted every 10th day



Dead pixel map shows where dead pixels are in latest data.



Full resolution dead pixel map




Amount of hot pixels (%)


Fraction of pixels that deviate more than 8-sigma from mean value.
Used exposure time was 42 seconds.
X-axis tics are plotted every 10th day





Amount of cold pixels (%)


Fraction of pixels that deviate more than 8-sigma from mean value.
Used exposure time was 42 seconds.
X-axis tics are plotted every 10th day





Temperature of the array


Mean temperature of the array during test.
Minimum and maximum temperatures during the test are indicated by the error bar.
X-axis tics are plotted every 10th day






Dark current count dependency on exp time


Red points correspond to latest data
Blue lines refer to 5 previous situations
Number of counts per known exp time, 0s included





Back to top Last modified: October 15 2007