System | Command | Arguments | Description | Type |
alfosc |
abort |
[-d] |
Aborts an ongoing exposure. |
DET |
alfosc |
acquisition |
[-c] [-q] [-nofo] <slit> <tt> |
Script for ALFOSC-spectroscopy target acquisition for slit <slit> using exposure time <tt>. If optional flag -c is used, a check image of the star on the slit is made. If optional flag -q is used, the user is queried for another iteration. The -nofo flag should be used if no automatic focus-offset should be set. |
TEL |
alfosc |
addtime |
[-d] <nn> |
Adds <nn> seconds to an ongoing exposure (<nn> can be negative). |
DET |
alfosc |
alfosc-calibs |
[-e] [-skip] <date-string> |
Script to do biases and spectral flats and arcs for all setups and windows used in a particular night.
Per setup, takes 11 biases, 5 spectral flats, and 1 arc for each arc lamp.
The date-string argument is expected like 'ALwb13' |
DATA |
alfosc |
allopen |
[-e] |
Moves all ALFOSC/FASU optical wheels to the OPEN position. |
INST |
alfosc |
ampl |
[-d] <x> |
Sets the active amplifier to <x>, where <x> can be A, B, C, D, AB, BC, AD, CD or DEFAULT. DEFAULT is amplifier D |
DET |
alfosc |
aperture |
[-d] [id] [name] [pos] [ready] [step][orient] <n> |
Moves aperture wheel to slot number <n>. [id] returns the NOT ID of the element in the light path. [name] returns the name of the element in the light path. [pos] eturns the position [0-7] of the element in the light path. [ready] returns '0' if the element is moving, '1' if it is ready. [step] returns the step position [0-320000] of the element in the light path. [orient] returns the optical orientation of the element in the light path. |
INST |
alfosc |
autoshow_off |
[-d] |
Turns off the automatic image display while reading out. If a DS9 is running it will be terminated. |
DISP |
alfosc |
autoshow_on |
[-d] |
Turns on the automatic image display while reading out. If no DS9 is running one will automatically be started. |
DISP |
alfosc |
bin |
[-d] <n> |
Sets the binning factor in both X and Y directions to <n>. |
DET |
alfosc |
calibexp |
[-e] [-f] [-n <nn>] [-o <ObjName>] [-lmi] <lampID> <tt> |
Sets ALFOSC calibration items up for a calibration spectrum with lamp <lampID>, take <nn> calibration images of exposure time <tt>, switch off lamps and, if not -lmi is given, take out mirror. With <lampID>=He/Ne/HeNe/ThAr/Halogen . |
DET |
alfosc |
callamptimes |
[-s ] [-xbin N] [-ybin M] <lampID> <grism> |
Returns the exposure time needed for
calibration exposures, based on
lamp and grism choice. The lampID should be one of
He/Ne/HeNe/ThAr/Halogen.
Slit width [-s] and binning [-xbin][-ybin] can be specified optionally.
|
INST |
alfosc |
clearobject |
[-d] |
Clears the value of the FITS keyword OBJECT. |
DATA |
alfosc |
clearobserver |
[-d] |
Clears the value of the FITS keyword OBSERVER. |
DATA |
alfosc |
comment |
[-d] <text> |
Sets the FITS keyword COMMENT to <text>. Will be cleared after each image. FEB 13, 2013: This command is currently unavailable. |
DATA |
alfosc |
dark |
[-d] [-t] [-f] [-n]<tt> |
Makes a dark exposure of <tt> seconds. If <tt> is set to zero a BIAS exposure is made.
If the exposure time is larger then 60 seconds, automatic remnant removal is done before the exposure starts.
If the option [-f] (fast mode) is used, the prompt will be returned when the exposure time is over and before the readout begins.
If the option [-n] is used, there will be no automatic remnant removal. |
DET |
alfosc |
display |
[<file>] |
Loads the image <file> into the ALFOSC DS9 display. If no file is specified, the last image obtained will be loaded. |
DISP |
alfosc |
display-start |
|
Starts an empty ALFOSC DS9 display. |
DISP |
alfosc |
ds9-for-mos |
|
Start a dedicated DS9 display that is used for MOS tweaking |
DISP |
alfosc |
expose |
[-d] [-t] [-f] [-n]<tt> |
Makes an exposure of <tt> seconds.
Remnant removal is made before the exposure starts, if the exposure time is larger then 60 seconds. If the option [-n] is used, no remnant removal is done.
If the option [-f] (fast mode) is used, the prompt will be returned when the exposure time is over and before the readout begins. If [-f] is used, make sure that "alfosc.wait-camera-state idle"-command is given before any "alfosc_camera_commands".
If the exposure time is larger than 300 seconds, the time left until the rotator reaches its limit will be checked. If there is not time enough to complete the exposure, an error will be generated and the exposure will not start. |
DET |
alfosc |
fasua |
[-d] [id] [name] [pos] [ready] <n> |
Moves FASU wheel A to position <n>. [id] returns the NOT ID of the element in the light path. [name] returns the name of the element in the light path. [pos] returns the position [0-6] of the element in the light path. [ready] returns '0' if the element is moving, '1' if it is ready. |
INST |
alfosc |
fasub |
[-d] [id] [name] [pos] [ready] <n> |
Moves FASU wheel B to position <n>. [id] returns the NOT ID of the element in the light path. [name] returns the name of the element in the light path. [pos] returns the position [0-6] of the element in the light path. [ready] returns '0' if the element is moving, '1' if it is ready. |
INST |
alfosc |
filename |
[-d] <nn> |
Sets the default file name to <nn> (four characters). |
DATA |
alfosc |
filenamestd |
[-d] |
Sets the filename back to the default file name. |
DATA |
alfosc |
focus |
[-e] [-n <N>] [-nodefault] [-t <nn>] [-a <mode>][-filter] |
Focuses the telescope. [-n <N>] makes <N> loops. [-t <nn>] sets exposure time to <nn> . [-nodefault] starts from current focus. [-a <mode>] acquisition using <mode>. |
TEL |
alfosc |
focus-offset |
[-e] [-d <nn>] |
Applies focus offset for optical elements in the light beam. If no offset is known a value of 0 will be assumed. Use [-d] flag to defocus the telescope with <nn> units.
|
TEL |
alfosc |
focuspyr |
|
Lets the user interactively examine a Focus Pyramid image to determine the focus offset required to bring the telescope in focus. |
DATA |
alfosc |
focuspyr-auto |
[<file>] |
Computes the required telescope offset from the Focus Pyramid image <file>. If no file is given, the last image in the data directory will be used. |
DATA |
alfosc |
focuspyr-setup |
[-e] [-filter] |
Sets ALFOSC up for focusing. If optional argument -filter is used, the filter wheels will be left as they are. |
INST |
alfosc |
focuswindow |
[-e] |
Sets the ALFOSC CCD to readout only a central 800x800 pixel unbinned window. |
DET |
alfosc |
grism |
[-d] [id] [name] [pos] [ready] [step][orient] <n> |
Moves the grism wheel to position <n>. [id] returns the NOT ID of the element in the light path. [name] returns the name of the element in the light path. [pos] returns the position [0-6] of the element in the light path. [ready] returns '0' if the element is moving, '1' if it is ready. [step] returns the step position [0-320000] of the element in the light path. [orient] returns the optical orientation of the element in the light path. |
INST |
alfosc |
hicut |
<value> |
Applies a minmax scaling to the loaded DS9 image and set the highcut to <value>. |
DISP |
alfosc |
imexam |
|
Initiates an IRAF imexam session on the loaded DS9 image. |
DATA |
alfosc |
impath |
[-d] <text> |
Sets the path of the image saving to <text>. |
DATA |
alfosc |
imtype |
[-d] <text> |
Sets the FITS keyword IMTYPE to <text>. |
DATA |
alfosc |
killdisplay |
|
Terminates all instances of the ALFOSC DS9 display. |
DISP |
alfosc |
killimexam |
|
Terminates all ALFOSC sequencer scripts related to imexam and the ALFOSC DS9 display. |
DISP |
alfosc |
lamp |
[-d] [position] <n> <m> |
Turns on/off lamp number <n>, <m>=1 is turn on, <m>=0 is turn off. [position] returns a 4 bit pattern corresponding to the state of the 4 lamps. |
INST |
alfosc |
locut |
<value> |
Applies a minmax scaling to the loaded DS9 image and set the lowcut to <value>. |
DISP |
alfosc |
log-comment |
"Comment in quotes" [file1 file2 ...] |
Set a comment in the last image (or the specified ones, if any) using the LOGCOMME keyword |
DATA |
alfosc |
mdark |
[-t] [-n] [-f]<tt> <nn> |
Makes <nn> dark exposures of <tt> seconds. If the [-t] flag is used, a simulated exposure is made. If the exposure time is larger then 60 seconds, automatic remnant removal is done before the exposure starts. If the option [-f] (fast mode) is used, the prompt will be returned when the exposure time is over and before the readout begins. If the option [-n] is used, there will be no automatic remnant removal. |
DET |
alfosc |
mexpose |
[-t] [-n] [-f]<tt> <nn> [<imtype>] |
Makes <nn> exposures of <tt> seconds.
Remnant removal is made before the exposure starts, if the exposure time is larger then 60 seconds. If the option [-n] is used, no remnant removal is done. If the option [-f] (fast mode) is used, the prompt will be returned when the exposure time is over and before the readout begins. If [-f] is used, make sure that "alfosc.wait-camera-state idle"-command is given before any "alfosc_camera_commands". If the exposure time is larger than 300 seconds, the time left until the rotator reaches its limit will be checked. If there is not time enough to complete the exposure, an error will be generated and the exposure will not start.
|
DET |
alfosc |
mirror |
[-d] [pos] [ready] <n> |
Moves calibration mirror in or out, <n>=1 for in and <n>=0 for out. [pos] returns the position of the calibration mirror. '1' is in, '0' is out. [ready] returns '0' if the element is moving, '1' if it is ready. |
INST |
alfosc |
object |
[-d] <text> |
Sets the FITS keyword OBJECT to <text>. |
DATA |
alfosc |
observer |
[-d] <text> |
Sets the FITS keyword OBSERVER to <text>. |
DATA |
alfosc |
optics |
[-e] [-s <slit>] [-g <grism>] [-f <filterID>] [-d <wheel>] [-m] [-a] [-p] [-o] [-h] |
Searches ALFOSC and FASU wheels for optical elements. See the ALFOSC Sequencer Command and Script Reference for a description of the output and a list of all possible <flags>. |
INST |
alfosc |
overlay |
[yes|no] |
Overlays the loaded DS9 image with seeing information and marks saturated objects. |
DISP |
alfosc |
quickspec |
[<file>] |
Does a rough spectral extraction for file <file>, or for the last image written to disk if no file is specified, and displays the reduced spectrum interactively. |
DATA |
alfosc |
quickspec-config |
[<options>] |
Sets parameters used in the quickspec script. See the ALFOSC Sequencer Command and Script Reference for a full list of possible options. |
DATA |
alfosc |
readout |
[-d] |
Closes the shutter and readout the ccd. The exposure must first be put in the background. Does not work correctly when using a window in Y direction. |
DET |
alfosc |
readspeed |
[-d] <readout_speed> |
Sets the CCD readout speed to <readout_speed> kpix/second. Valid values for <readout_speed> are 100, 200, 400 or 800. |
DET |
alfosc |
remove_remnants |
|
Remove remnants from the CCD |
DET |
alfosc |
rempath |
[-d] <nn> |
Sets the remote saving path to <nn>. |
DATA |
alfosc |
remsave_off |
[-d] |
Turns off remote saving. |
DATA |
alfosc |
remsave_on |
[-d] |
Turns on remote saving. |
DATA |
alfosc |
remsystem |
[-d] <nn> |
Sets the remote host computer to <nn>. |
DATA |
alfosc |
reset-log |
|
Resets the talker/obslog and sets it for alfosc |
DATA |
alfosc |
resetxy |
[-d] |
Resets the ccd binning to 1, the X and Y size to maximum and the X and Y beginning to 1. |
DET |
alfosc |
restore-uparm |
|
Restores the uparm parameter files
|
DATA |
alfosc |
runselector |
<date> |
Select current program being observed from the sequencer command line. |
DATA |
alfosc |
runselectorUIF |
[alfosc|fies] <date> |
Select current program being observed from a graphical user interface |
DATA |
alfosc |
save |
[-d] |
Saves a read-out image to disk. |
DATA |
alfosc |
setdisplay |
[<Xserver>] |
Sets the X Server on which the DS9 window will be displayed to <Xserver>. If none is specified, the X Server from which the script is executed will be used. |
DISP |
alfosc |
single-mdark |
[-t] <tt> <nn> |
Makes <nn> dark exposures of <tt> seconds. |
DET |
alfosc |
single-mexpose |
[-t] <tt> <nn> [<imtype>] |
Makes <nn> exposures of <tt> seconds. |
DET |
alfosc |
slitoff |
[slit=<nn> | xref=<x> yref=<y>] |
Calculates the telescope offset needed for slit number <nn>, or for a slit with position (<x>, <y>). |
TEL |
alfosc |
slitrot |
|
Uses the currently loaded DS9 image to compute the TCS field rotation angle required to align two objects (interactively identified by the user) along a slit. |
DATA |
alfosc |
snapshot |
[store|restore] |
Takes a snapshot of the current instrument and detector setup. [store] stores the snapshot. [restore] restores the latest snapshot. |
INST |
alfosc |
tweakmos |
[-e] <MASKfile.fits> <FIELDfile.fits> |
Comparison of mask and field positions of the fiducial stars, obtained from subsequent images of the mask and the sky |
DATA |
alfosc |
wait-camera-state |
[idle|integrating|readout|not-integrating] |
Routine to wait for a given ALFOSC CCD3 camera state. |
INST |
alfosc |
wait_alfosc_ready |
[-d] |
Waits until all the following items are ready (not moving): FASU A and B, aperture, filter, grism, ALFOSC focus, FAPOL carriage and FAPOL polarizer. |
INST |
alfosc |
wcs-align |
[yes|no] |
Display the loaded image using world coordinates such that North is up. Called with the [no] option, the image is aligned according to orientation on the detector. |
DISP |
alfosc |
wheels |
[-e] [-s <slit>] [-g <grism>] [-c <crossdisp>] [-f <filterID>] [-d <diffuserID>][-nowait] [-forceFASU] |
Sets all 5 ALFOSC wheels to the given setup. Default is OPEN. If optional flag -nowait is used, the script exits while wheels are moving. |
INST |
alfosc |
xbeg |
[-d] <nn> |
Sets the X beginning to <nn>. |
DET |
alfosc |
xbin |
[-d] <n> |
Sets the binning factor in the X direction to <n>. |
DET |
alfosc |
xsize |
[-d] <nn> |
Sets the X size to <nn>. |
DET |
alfosc |
ybeg |
[-d] <nn> |
Sets the Y beginning to <nn>. |
DET |
alfosc |
ybin |
[-d] <nn> |
Sets the binning factor in the Y direction to <n>. |
DET |
alfosc |
ysize |
[-d] <nn> |
Sets the Y size to <nn>. |
DET |
alfosc |
zscale |
|
Sets the upper and lower limits of the loaded DS9 image based on the IRAF ZScale algorithm. |
DISP |